#100 Vinyl Adhesive, 4 oz can only with applicator cap. Vinyl not included. A face mask or underwater goggles should always be used when going underwater to make repairs.

Regular Use Instructions:

• All surfaces must be clean
• Cut round corners on patch
• For inflatables and light gauge vinyls, apply adhesive to patch sparingly and press patch tightly to surface to be repaired
• Allow to dry for 24 hours

For deep underwater repairs:

• Cut round corners on patch
• Apply adhesive to patch and fold patch over upon itself
• When you reach the damaged area underwater unfold patch and apply immediately to liner, squeezing out all water bubbles
• Do not disturb patch for at least 48 hours
• Allow 4-7 days for full cure.