Contains: 2 oz tube of #100 vinyl adhesive. 130 sq. in. of patching vinyl and dauber-applicator.

Instructions:
All surfaces must be clean. Cut round corners on patch. For inflatables and light gauge vinyls, apply adhesive to patch sparingly and press tightly to the surface to be repaired. Allow drying for 24 hours.

A face mask or underwater goggles should always be used when going underwater to make repairs. For deep underwater repairs, cut round corners on the patch. Apply adhesive to patch and fold patch over upon itself. When you reach the damaged area under water unfold the patch and apply immediately to liner, squeezing out all water bubbles. Do not disturb the patch for at least 48 hours. Allow 4-7 days for full cure.

For quick and easy vinyl repairs without liquid adhesive, use Boxer Vinyl Plastic Pool Patches. This is a clear tape where you peel off the paper backing and apply immediately. Vinyl Plastic Pool Patches are excellent for other applications such as vinyl upholstery and waterbeds.